ROOF DRIP SIDE FINISH MOULDING REMOVAL


  1. REMOVE ROOF DRIP SIDE FINISH MOULDING


    1. Put protective tape around the roof drip side finish moulding.

    2. Using a moulding remover, disengage the 6 clips and remove the roof drip side finish moulding.

      Note


      • Do not remove the clips.

      • If the clips are damaged or dropped off, replace them with new clips.

      A0163FVE01

  2. REMOVE NO. 1 WINDSHIELD OUTSIDE MOULDING CLIP

    Tech Tips

    Perform the following procedure if replacing the No. 1 windshield outside moulding clips.


    1. Remove the 5 No. 1 windshield outside moulding clips.

      A0161PKE01

  3. REMOVE ROOF DRIP CENTER SIDE FINISH MOULDING


    1. Put protective tape around the roof drip center side finish moulding .

    2. Using a moulding remover, disengage the 2 clips and remove the roof drip center side finish moulding .

      Note


      • Do not remove the clips.

      • If the clips are damaged or dropped off, replace them with new clips.

      A015ZJQE01

  4. REMOVE NO. 1 ROOF DRIP SIDE FINISH MOULDING CLIP

    Tech Tips

    Perform the following procedure if replacing the No. 1 roof drip side finish moulding clips.


    1. Remove the 2 No. 1 roof drip side finish moulding clips.

      A0161QRE01