ROCKER PANEL MOULDING REMOVAL


  1. REMOVE NO. 2 REAR FLOOR HOUSING SHIELD


    1. A01608Q

      Using a clip remover, remove the clip.

    2. Remove the screw and No. 2 rear floor housing shield.

  2. REMOVE ROCKER PANEL MOULDING ASSEMBLY


    1. A0162XBE01

      Put protective tape around the rocker panel moulding assembly.

    2. A016269

      Remove the 4 screws and clip.

    3. A0161DD

      Using a clip remover, remove the 7 clips.

    4. A01616A

      Remove the 2 screws.

    5. A016321

      Disengage the 16 clips and remove the rocker panel moulding assembly.