REAR BUMPER REASSEMBLY


  1. INSTALL UPPER REAR BUMPER RETAINER LH


    1. A015ZZU

      Install the upper rear bumper retainer LH with the 2 screws.

  2. INSTALL UPPER REAR BUMPER RETAINER RH

    Tech Tips

    Use the same procedure for the RH side and LH side.

  3. INSTALL NO. 2 REAR BUMPER SIDE SUPPORT LH


    1. A0161UT

      Install the No. 2 rear bumper side support LH with the 2 screws.

  4. INSTALL NO. 2 REAR BUMPER SIDE SUPPORT RH

    Tech Tips

    Use the same procedure for the RH side and LH side.

  5. INSTALL NO. 1 REAR BUMPER SIDE SUPPORT LH


    1. A015ZKK

      Install the No. 1 rear bumper side support LH with the 2 screws and clip.

  6. INSTALL NO. 1 REAR BUMPER SIDE SUPPORT RH

    Tech Tips

    Use the same procedure for the RH side and LH side.

  7. INSTALL REAR BUMPER REINFORCEMENT SUB-ASSEMBLY


    1. A0160IQ

      Install the rear bumper reinforcement sub-assembly with the 8 bolts.

      Torque:
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

  8. INSTALL REAR BUMPER ENERGY ABSORBER


    1. A015YSG

      Install the rear bumper energy absorber.

  9. INSTALL REAR BUMPER PAD LH


    1. A0160II

      Install a new rear bumper pad LH.

      Tech Tips

      Stick the new rear bumper pad LH on the line marked on the rear bumper assembly.

  10. INSTALL REAR BUMPER PAD RH

    Tech Tips

    Use the same procedure for the RH side and LH side.

  11. INSTALL REAR BUMPER LOWER RETAINER LH


    1. A015ZG0

      Install the rear bumper lower retainer LH with the screw.

  12. INSTALL REAR BUMPER LOWER RETAINER RH

    Tech Tips

    Use the same procedure for the RH side and LH side.

  13. INSTALL REAR BUMPER PROTECTOR LH


    1. Install the rear bumper protector LH.

  14. INSTALL REAR BUMPER PROTECTOR RH


    1. Install the rear bumper protector RH.

  15. INSTALL REAR BUMPER EXTENSION LH


    1. A016315

      Install the rear bumper extension LH with the 3 bolts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

  16. INSTALL REAR BUMPER EXTENSION RH

    Tech Tips

    Use the same procedure for the RH side and LH side.

  17. INSTALL NO. 2 REAR BUMPER SIDE RETAINER LH


    1. A01628W

      Install the No. 2 rear bumper side retainer LH with the bolt and screw.

      Torque:
      Bolt
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

  18. INSTALL NO. 2 REAR BUMPER SIDE RETAINER RH

    Tech Tips

    Use the same procedure for the RH side and LH side.

  19. INSTALL REFLEX REFLECTOR ASSEMBLY LH


    1. A015YKA

      Engage the claw and install the reflex reflector assembly LH.

    2. Install the screw.

  20. INSTALL REFLEX REFLECTOR ASSEMBLY RH

    Tech Tips

    Use the same procedure for the RH side and LH side.

  21. INSTALL REAR BUMPER PIECE LH


    1. A01604L

      Engage the 2 claws and install the rear bumper piece LH.

  22. INSTALL REAR BUMPER PIECE RH

    Tech Tips

    Use the same procedure for the RH side and LH side.

  23. INSTALL NO. 3 ULTRASONIC SENSOR RETAINER (w/ LEXUS Parking Assist-sensor System)

    for Corner Sensor: Click here

    Tech Tips

    Use the same procedure for the RH side and LH side.

    for Back Sensor: Click here

    Tech Tips

    Use the same procedure for the RH side and LH side.

  24. INSTALL NO. 1 ULTRASONIC SENSOR (w/ LEXUS Parking Assist-sensor System)

    Click here

    Tech Tips

    Use the same procedure for the RH side and LH side.

  25. INSTALL NO. 2 ULTRASONIC SENSOR (w/ LEXUS Parking Assist-sensor System)

    Click here

    Tech Tips

    Use the same procedure for the RH side and LH side.

  26. INSTALL NO. 3 LUGGAGE ROOM WIRE (w/ LEXUS Parking Assist-sensor System)


    1. A0163F1

      Engage the 4 clamps and install the No. 3 luggage room wire.

    2. Engage the 4 connectors.