REAR BUMPER REMOVAL


  1. REMOVE NO. 2 LUGGAGE COMPARTMENT TRIM COVER (w/ LEXUS Parking Assist-sensor System)

  2. REMOVE DECK SIDE TRIM BOX LH (w/ LEXUS Parking Assist-sensor System)

  3. REMOVE DECK SIDE TRIM BOX RH (w/ LEXUS Parking Assist-sensor System)

  4. REMOVE ROPE HOOK ASSEMBLY (w/ LEXUS Parking Assist-sensor System)


    1. A0163BF

      Remove the 3 bolts and 3 rope hook assemblies.

  5. REMOVE REAR LUGGAGE COMPARTMENT TRIM COVER (w/ LEXUS Parking Assist-sensor System)


    1. A015ZVT

      Using a clip remover, remove the 3 clips.

    2. Disengage the 4 clips and remove the rear luggage compartment trim cover.

  6. REMOVE NO. 2 ROOM LIGHT ASSEMBLY (w/ LEXUS Parking Assist-sensor System)


    1. A0161YS

      Disengage the claw and disconnect the No. 2 room light assembly.

    2. Disconnect the connector and remove the No. 2 room light assembly.

  7. REMOVE ROPE HOOK (w/ LEXUS Parking Assist-sensor System)


    1. A0162EV

      Remove the 2 rope hooks.

  8. REMOVE NO. 2 LUGGAGE COMPARTMENT TRIM HOOK


    1. A0163DB

      Remove the 3 No. 2 luggage compartment trim hooks as shown in the illustration.

  9. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER (w/ LEXUS Parking Assist-sensor System)


    1. A015Z78

      Using a clip remover, remove the 2 clips.

    2. Disengage the 4 claws and remove the front luggage compartment trim cover.

  10. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (w/ LEXUS Parking Assist-sensor System)


    1. A0162LQ

      Remove the screw and No. 1 luggage compartment trim hook.

  11. REMOVE SIDE LUGGAGE COMPARTMENT TRIM COVER LH (w/ LEXUS Parking Assist-sensor System)


    1. A01603B

      Using a clip remover, remove the 3 clips and side luggage compartment trim cover.

  12. REMOVE NO. 1 REAR BUMPER PLATE


    1. A0163EF

      Using a screwdriver, disengage the 2 claws and remove the No. 1 rear bumper plate.

      Tech Tips


      • Tape the screwdriver tip before use.

      • Use the same procedure for the RH side and LH side.

  13. REMOVE REAR BUMPER ASSEMBLY


    1. A015Z4C

      w/ LEXUS Parking Assist-Sensor System:


      1. Disconnect the No. 3 luggage room wire connector.

    2. A0161AFE01

      Put protective tape around the rear bumper assembly.

    3. Using a clip remover, remove the 2 clips.

    4. Remove the 6 screws and 2 rear bumper seal brackets.

    5. A0160MI

      Disengage the 6 claws and disconnect the rear bumper assembly as shown in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    6. A01619W

      Disengage the 4 claws and remove the rear bumper assembly as shown in the illustration.

    7. A0162V9

      w/ LEXUS Parking Assist-Sensor System:


      1. Disengage the clamp and remove the grommet.