FRONT BUMPER DISASSEMBLY


  1. REMOVE FOG LIGHT ASSEMBLY LH


    1. A0160D0

      Remove the screw.

    2. Disengage the 2 guides and remove the fog light assembly.

  2. REMOVE FOG LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure for the RH side and LH side.

  3. REMOVE NO. 1 ULTRASONIC SENSOR (w/ LEXUS Parking Assist-sensor System)

    Click here

    Tech Tips

    Use the same procedure for the RH side and LH side.

  4. REMOVE NO. 3 ULTRASONIC SENSOR RETAINER (w/ LEXUS Parking Assist-sensor System)

    Click here

    Tech Tips

    Use the same procedure for the RH side and LH side.

  5. REMOVE HEADLIGHT CLEANER WASHER NOZZLE LH


    1. A015YW5

      Extend the headlight cleaner washer nozzle.

    2. Disengage the 2 claws and remove the headlight cleaner washer nozzle.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  6. REMOVE HEADLIGHT CLEANER WASHER NOZZLE RH

    Tech Tips

    Use the same procedure for the RH side and LH side.

  7. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH


    1. A0162KOE01

      Disconnect the hose joint and the headlight cleaner hose.

    2. Remove the bolt.

    3. Disengage the 2 claws and remove the headlight washer actuator sub-assembly as shown in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  8. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure for the RH side and LH side.

  9. REMOVE NO. 4 ENGINE ROOM WIRE (w/ LEXUS Parking Assist-sensor System)


    1. A0162RG

      Disengage the 13 clamps and remove the No. 4 engine room wire.

  10. REMOVE HEADLIGHT HOSE


    1. A015Z2G

      Disengage the 7 clamps and remove the headlight hose.

  11. REMOVE RADIATOR GRILLE PROTECTOR


    1. A01616L

      Disengage the 15 claws and remove the radiator grille protector.

  12. REMOVE RADIATOR GRILLE ASSEMBLY


    1. A015YJE

      Using a clip remover, remove the 2 clips.

    2. Disengage the 15 claws and 2 guides, and remove the radiator grille assembly.

  13. REMOVE RADIATOR GRILLE


    1. A015Z2Q

      Using a clip remover, remove the 2 clips.

    2. Disengage the 6 claws and remove the radiator grille.

  14. REMOVE RADIATOR GRILLE EMBLEM (w/o Dynamic Radar Cruise Control System)

    Tech Tips

    When removing the emblem, heat the radiator grille and emblem using a heat light.

    Heating Temperature
    Item Temperature
    Radiator Grille 40 to 60°C (104 to 140°F)
    Emblem 20 to 30°C (68 to 86°F)

    Note

    Do not heat the radiator grille and emblem excessively.


    1. Put protective tape around the radiator grille emblem.

    2. Insert a piano wire between the radiator grille and radiator grille emblem.

    3. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

    4. Pull the piano wire and cut through the double-sided tape that holds the emblem to the radiator grille.

      Note


      • If reusing the radiator grille emblem, take care not to damage the radiator grille emblem.

      • Be careful not to damage the radiator grille.

    5. A01609LE01

      Remove the radiator grille emblem.

  15. REMOVE RADIATOR GRILLE EMBLEM (w/ Dynamic Radar Cruise Control System)


    1. A0162WO

      Remove the 2 spring nuts.

    2. Disengage the claw and remove the radiator grille emblem.

  16. REMOVE LOWER RADIATOR GRILLE


    1. A0161R6

      Disengage the 14 claws and remove the lower radiator grille.

  17. REMOVE FRONT BUMPER EXTENSION MOUNTING BRACKET


    1. A0161NL

      Remove the 2 screws.

    2. Disengage the 2 claws and remove the front bumper extension mounting bracket.

  18. REMOVE FOG LIGHT COVER LH


    1. A01637K

      Disengage the 4 claws and remove the front fog light cover LH.

  19. REMOVE FOG LIGHT COVER RH

    Tech Tips

    Use the same procedure for the RH side and LH side.

  20. REMOVE LOWER FRONT BUMPER COVER


    1. A0162XG

      Disengage the 2 claws and remove the lower front bumper cover.

  21. REMOVE FRONT FENDER LINER RETAINER


    1. A0161OE

      Disengage the 2 claws and remove the 2 front fender liner retainers.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  22. REMOVE FRONT BUMPER SIDE RETAINER LH


    1. A0161YM

      Remove the screw.

    2. Disengage the 2 claws and remove the front bumper side retainer LH.

  23. REMOVE FRONT BUMPER SIDE RETAINER RH

    Tech Tips

    Use the same procedure for the RH side and LH side.

  24. REMOVE FRONT BUMPER ENERGY ABSORBER


    1. A01616Y

      Remove the front bumper energy absorber.

  25. REMOVE FRONT BUMPER REINFORCEMENT


    1. A0163CI

      Disengage the 2 clips and disconnect the radiator support opening cover.

    2. Disengage the clamp and disconnect the cooler (ambient temp sensor) thermistor.

    3. Remove the 6 bolts and front bumper reinforcement.