FRONT DOOR BELT MOULDING REMOVAL


  1. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG


    1. A0161A6

      Using a moulding remover, disengage the 3 claws, and remove the front door inside handle bezel plug.

  2. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL


    1. A015ZWU

      Using a moulding remover, disengage the 3 claws and the 2 clips.

    2. Disconnect the connector and remove the power window regulator master switch assembly with front door armrest base panel.

  3. REMOVE COURTESY LIGHT ASSEMBLY


    1. A015ZOI

      Using a moulding remover, disengage the claw and remove the courtesy light assembly.

    2. Disconnect the connector.

  4. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY


    1. A0160MG

      Remove the 2 screws.

    2. Using a clip remover, disengage the 9 clips.

    3. A01604GE02

      Pull out the front door trim board in the direction indicated by the arrow.

    4. Remove the reference boss from the front door panel.

    5. Raise the front door trim board to disengage the 4 claws and remove the front door trim board together with the front door inner glass weatherstrip.

    6. A0160JT

      Disconnect the front door lock remote control cable assembly and front door inside locking cable assembly.

    7. Disconnect each connector and remove the front door trim board sub-assembly.

    8. Remove the 2 front door trim board retainers (green) from the front door trim board.

  5. REMOVE FRONT DOOR INNER GLASS WEATHERSTRIP


    1. A0160NK

      Using a moulding remover, disengage the 4 clips as shown in the illustration and remove the front door inner glass weatherstrip from the front door trim board.

  6. REMOVE FRONT DOOR FRAME COVER


    1. A0160ZK

      Remove the nut and front door frame cover.

  7. REMOVE FRONT DOOR BELT MOULDING ASSEMBLY


    1. A0161IBE01

      Fully open the front door glass.

    2. Put protective tape on the door below the front door belt moulding assembly.

    3. Using a moulding remover, disengage the 7 clips and remove the front door belt moulding assembly.