RELAY ON-VEHICLE INSPECTION


  1. INSPECT HEADLIGHT RELAY (HEAD LP)


    1. A0160KXE04

      Remove the headlight relay from the No. 1 engine room relay block.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Specified Condition
      3 - 5 10 kΩ or higher (when battery voltage is not applied to terminals 1 and 2)
      3 - 5 Below 1 Ω (when battery voltage is applied to terminals 1 and 2)

      If the result is not as specified, replace the relay.