HEADLIGHT LEVELING ECU REMOVAL


  1. REMOVE FRONT DOOR SCUFF PLATE LH


    1. A0160BJE01

      Put protective tape around the front door scuff plate.

    2. Using a moulding remover, disengage the 4 clips.

    3. A0161H2

      Disengage the 7 claws and remove the front door scuff plate LH.

  2. REMOVE FRONT DOOR OPENING TRIM COVER LH


    1. A016285

      Disengage the 4 claws and remove the front door opening trim cover LH.

  3. REMOVE FRONT FLOOR FOOTREST LH (for LHD)


    1. A0160ZM

      Using a moulding remover, disengage the 2 clips and remove the front floor footrest LH.

    2. Turn back the floor carpet in order to remove the 2 clips.

  4. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. A0161PQE01

      Remove the 2 screws <D>.

    2. Push the 2 claws in the direction indicated by the arrow to disengage them.

    3. Remove the No. 1 instrument panel under cover sub-assembly from the guide as shown in the illustration and pull the cover toward the rear of the vehicle.

    4. Disconnect the connectors and remove the No. 1 instrument panel under cover sub-assembly.

  5. REMOVE HEADLIGHT LEVELING ECU ASSEMBLY


    1. A0161I5

      Disengage the 2 clips and disconnect the connector holder.

    2. A0161PW

      Remove the bolt and nut.

    3. A01622G

      Disconnect the connector.

    4. Disengage the clamp and remove the headlight leveling ECU assembly.