HEIGHT CONTROL SENSOR INSPECTION


  1. INSPECT FRONT HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH


    1. A016354E01

      Connect 3 dry cell batteries (1.5 V) in series.

    2. Connect a positive (+) lead from the batteries to terminal 3 and the negative (-) lead from the batteries to terminal 1.

    3. Measure the voltage between terminals 2 and 1 while slowly moving the link up and down.

      Standard Voltage
      Tester Connection Condition Specified Condition
      2 (SHFL) - 1 (SHG) +45° Approx. 4.05 V
      2 (SHFL) - 1 (SHG) 0°(normal) Approx 2.25 V
      2 (SHFL) - 1 (SHG) -45° Approx 0.45 V

      If the result is not as specified, replace the front height control sensor sub-assembly LH.

  2. INSPECT REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH


    1. A0163E9E01

      Connect 3 dry cell batteries (1.5 V) in series.

    2. Connect a positive (+) lead from the batteries to terminal 3 and a negative (-) lead from the batteries to terminal 1.

    3. Measure the voltage between terminals 2 and 1 while slowly moving the link up and down.

      Standard Voltage
      Tester Connection Condition Specified Condition
      2 (SHRL) - 1 (SHG) +45° Approx. 4.05 V
      2 (SHRL) - 1 (SHG) 0°(normal) Approx 2.25 V
      2 (SHRL) - 1 (SHG) -45° Approx 0.45 V

      If the result is not as specified, replace the rear height control sensor sub-assembly LH.