STOP LIGHT SWITCH INSPECTION


  1. INSPECT STOP LIGHT SWITCH ASSEMBLY


    1. Measure the resistance according to the value(s) in the table below.

      A01637QE01
      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 - 2 Pushed 10 kΩ or higher
      1 - 2 Not pushed Below 1 Ω
      3 - 4 Pushed Below 1 Ω
      3 - 4 Not pushed 10 kΩ or higher

      If the result is not as specified, replace the stop light switch assembly.