HEADLIGHT DIMMER SWITCH REMOVAL


  1. REMOVE SPIRAL CABLE WITH STEERING ANGLE SENSOR

    Click here

  2. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY


    1. A01606T

      Disconnect the 2 connectors.

    2. Disengage the claw and remove the windshield wiper switch assembly as shown in the illustration.

      Note

      If the claw is pushed with excessive force, it may break.

  3. REMOVE TILT AND TELESCOPIC SWITCH


    1. A0163FB

      Disconnect the connector.

    2. Disengage the claw and pull out the tilt and telescopic switch.

      Note

      Pushing on the claw too hard will break the claw.

  4. REMOVE HEADLIGHT DIMMER SWITCH ASSEMBLY


    1. A0162A4

      Disconnect the connector.

    2. Disengage the clamp and claw as shown in the illustration.

    3. A015YO0

      Remove the headlight dimmer switch assembly as shown in the illustration.