LICENSE PLATE LIGHT ASSEMBLY REMOVAL


  1. REMOVE LUGGAGE COMPARTMENT DOOR ASSIST GRIP


    1. A0161LE

      Disengage the 3 claws and disconnect the cover.

    2. A015ZZA

      Remove the 2 screws and luggage compartment door assist grip.

  2. REMOVE LUGGAGE COMPARTMENT DOOR COVER


    1. A015YNG

      Using a clip remover, remove the 12 clips and luggage compartment door cover.

  3. REMOVE LUGGAGE COMPARTMENT DOOR REINFORCEMENT


    1. A015ZQH

      Using a clip remover, remove the clip.

    2. Remove the 2 nuts and luggage compartment door reinforcement.

  4. REMOVE LUGGAGE KEY ELECTRICAL SWITCH


    1. A015Z4A

      Disconnect the connector.

    2. Remove the nut and luggage key electrical switch.

  5. REMOVE TELEVISION CAMERA ASSEMBLY (w/ Parking Assist Monitor System)


    1. A01623T

      Disengage the camera connector clamp.

    2. Disconnect the television camera connector.

    3. Remove the 2 screws.

    4. A015Z8EE01

      Disengage the 2 claws to remove the television camera assembly as shown in the illustration.

  6. REMOVE REAR LIGHT ASSEMBLY LH


    1. A015YTP

      Disconnect the connector.

    2. Remove the 3 nuts and rear light assembly.

  7. REMOVE REAR LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure for the RH side and the LH side.

  8. REMOVE LUGGAGE COMPARTMENT OUTSIDE DOOR GARNISH SUB-ASSEMBLY


    1. A015YZ9

      Remove the 3 nuts.

    2. Disengage the 5 clips and remove the luggage compartment outside door garnish sub-assembly.

  9. REMOVE LICENSE PLATE LIGHT ASSEMBLY


    1. A0160WOE01

      Disconnect the connector.

    2. Disengage the 2 claws and remove the license plate light assembly as shown in the illustration.