REAR LIGHT ASSEMBLY ON-VEHICLE INSPECTION


  1. INSPECT REAR LIGHT ASSEMBLY


    1. A0160AGE09

      Disconnect the connector from the rear inner combination light.

    2. Measure the voltage according to the value(s) in the table below.

      Standard Voltage
      LH Side
      Tester Connection Condition Specified Condition
      Q40-1 - Q40-3 Light control switch in TAIL 11 to 14 V
      Q40-1 - Q40-3 Light control switch OFF Below 1 V
      RH Side
      Tester Connection Condition Specified Condition
      Q46-1 - Q46-3 Light control switch in TAIL 11 to 14 V
      Q46-1 - Q46-3 Light control switch OFF Below 1 V

      If the result is not as specified, repair or replace the wire harness or connector.