REAR COMBINATION LIGHT ASSEMBLY DISASSEMBLY


  1. REMOVE REAR COMBINATION LIGHT BODY GASKET


    1. A015ZDB

      Remove the rear combination light body gasket.

      Note


      • Be sure to remove all the traces of the old gasket from the body.

      • Do not reuse the removed gasket. Be sure to install a new rear combination light body gasket to prevent water ingress.

  2. REMOVE REAR TURN SIGNAL LIGHT BULB


    1. A0161TO

      Turn the rear turn signal light bulb and the rear light socket and wire in the direction indicated by the arrow in the illustration and disconnect them as a unit.

    2. Remove the rear turn signal light bulb from the rear light socket and wire.

  3. REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY


    1. A0160A7

      Disconnect the connector and remove the rear combination light socket and wire sub-assembly.