HAZARD WARNING SWITCH INSTALLATION


  1. INSTALL CLOCK ASSEMBLY (w/o Navigation System)


    1. A0161JJ

      Connect the connector.

    2. A0162KSE01

      Install the cover with the 9 screws.

    3. A0162I6

      Engage the 5 claws.

    4. A0162OB

      Install the panel with the 6 screws.

  2. INSTALL RADIO RECEIVER ASSEMBLY (w/o Navigation System)


    1. A0161CR

      Install the radio receiver assembly as shown in the illustration.

  3. INSTALL NO. 2 RADIO BRACKET (w/o Navigation System)


    1. A0161EW

      Install the No. 2 radio bracket with the 6 bolts.

  4. INSTALL NO. 1 RADIO BRACKET (w/o Navigation System)


    1. A0160RO

      Install the No. 1 radio bracket with the 6 bolts.

  5. INSTALL INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System)


    1. Connect each connector.

    2. A015ZQC

      Install the integration control panel with radio receiver assembly with the 4 bolts.

  6. INSTALL CLOCK ASSEMBLY (w/ Navigation System)


    1. A0163B4E01

      Engage the 2 clips and install the clock assembly.

  7. INSTALL RADIO RECEIVER ASSEMBLY (w/ Navigation System)


    1. A01608D

      Install the radio receiver assembly as shown in the illustration.

  8. INSTALL NO. 2 RADIO BRACKET (w/ Navigation System)


    1. A015Z6H

      Install the No. 2 radio bracket with the 7 bolts.

  9. INSTALL NO. 1 RADIO BRACKET (w/ Navigation System)


    1. A0160LX

      Install the No. 1 radio bracket with the 7 bolts.

    2. A015YV5

      Engage the connector clamp.

  10. INSTALL MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System)


    1. Connect each connector.

    2. A0162FS

      Install the the multi-display with radio receiver assembly with the 4 bolts.

  11. INSTALL CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL


    1. A0160YT

      Engage the 4 claws and install the center lower instrument cluster finish panel.

  12. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. A0160X4

      Connect the connectors.

    2. Engage the 11 claws and install the No. 3 instrument panel register assembly.

  13. INSTALL FRONT ASH RECEPTACLE ASSEMBLY


    1. A0162Y8E02

      Connect the connectors.

    2. Insert the protruding parts of the front ash receptacle assembly into the 2 guide holes as shown in the illustration.

    3. A0160IR

      Install the front ash receptacle assembly with the 2 screws <E>.

  14. INSTALL CONSOLE PANEL SUB-ASSEMBLY


    1. A015ZS3

      Connect the connectors.

    2. Engage the 8 clips and install the console panel sub-assembly.

  15. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH


    1. A0161VR

      Engage the claw and 2 clips, and then install the upper No. 2 console panel garnish.

  16. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH


    1. A0161PI

      Engage the claw and 2 clips, and then install the upper No. 1 console panel garnish.

  17. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A0160BL

      Turn the shift lever knob clockwise and install the shift lever knob sub-assembly.

  18. ADJUST CLOCK