HEADLIGHT ASSEMBLY INSTALLATION


  1. INSTALL HEADLIGHT ASSEMBLY


    1. Engage the headlight bracket pin.

    2. Install the headlight assembly with the 3 bolts.

      Torque:
      4.9 N*m  { 50 kgf*cm, 43 in.*lbf }
    3. A015ZTW

      Connect the connector as shown in the illustration.

  2. INSTALL FRONT UPPER FENDER PROTECTOR


    1. A0162I4

      Engage the claw and the 4 clips and install the front upper fender protector LH.

    2. Engage the clip on the rubber portion of the cowl top ventilator louver sub-assembly with the front upper fender protector LH.

  3. INSTALL ENGINE ROOM SIDE COVER LH (for LH Side)

    for LHD Click here

    for RHD Click here

  4. INSTALL ENGINE ROOM SIDE COVER RH (for RH Side)

    for LHD Click here

    for RHD Click here

  5. INSTALL FRONT BUMPER ASSEMBLY


    1. Connect the 2 fog light connectors.

    2. Connect the headlight cleaner hose to the windshield washer jar and pump assembly.

    3. w/ LEXUS Parking Assist-Sensor system:


      1. Connect the ultrasonic sensor connector.

    4. A01606M

      Engage the 10 claws and install the front bumper assembly.

    5. A0161S5

      Install the 2 clips and screw.

    6. A0163H6

      Install the 8 screws.

    7. A0162S2

      Install the screw.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    8. A015YV2

      Install the 2 pin hold clips.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  6. INSTALL RADIATOR GRILLE PROTECTOR


    1. A01623G

      Install the 2 radiator grille protectors.

  7. INSTALL COOL AIR INTAKE DUCT SEAL


    1. A01638L

      Install the cool air intake duct seal with the 9 clips.

  8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    Some systems need to be initialized after the cable is reconnected Click here.

  9. ADJUST HEADLIGHT AIMING

    Click here

  10. ADJUST FOG LIGHT AIMING

    Click here