LIGHTING SYSTEM CUSTOMIZE PARAMETERS

Tech Tips

The followings are the possible items to be customized.

Note


  • After confirming whether the items of the customer's request is applicable or not for the customized items, perform the customize operation.

  • Be sure to record the current value before customizing.

  • In case of performing the troubleshooting, pay attention as there is a possibility that the function is OFF by customizing. (Example: In case of the symptom in which "The wireless operation does not function", check that the wireless operation is not OFF by customizing, then perform the troubleshooting.)

Illuminated Entry
Display Default Contents Setting
Exterior Foot Light Control AVAIL Lights up the door mirror foot lights when either of the following occurs: the doors are unlocked with the transmitter, or the key enters any actuation area around the doors. NOT AVL / AVAIL
Exterior Foot Light Lighting Time 15 s Changes the lighting time of the door mirror foot lights. 15 s / 7.5 s / 30 s
Light Control
Display Default Contents Setting
Sensitivity NORMAL Adjusts the sensitivity of the automatic light control system. LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2
Response Time*1 0.1 s Changes the delay timing of lighting the taillights when going into a tunnel when the light control switch is in the AUTO position. 0.1 s / 1.0 s
Disp Ex OFF Sen NORMAL Changes the ambient brightness level to brighten the dimmed lights such as the indicator lights of the combination meter, A/C indicator light, and clock. LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2
Disp Ex ON Sen NORMAL Changes the ambient brightness level to dim the lights such as the indicator lights of the combination meter, A/C indicator light, and clock. LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2

Tech Tips

The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.