RAIN SENSOR ON-VEHICLE INSPECTION


  1. INSPECT RAIN SENSOR


    1. A0162XHE01

      Disconnect the R7 rain sensor connector.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      R7-3 (ES) - Body ground Always Below 1 Ω

      If the result is not as specified, repair or replace the harness or connector.

    3. Measure the voltage according to the value(s) in the table below.

      Standard Voltage
      Tester Connection Condition Specified Condition
      R7-1 (SIG) - Body ground Engine switch on (IG) 11 to 14 V

      If the result is not as specified, repair or replace the harness or connector.