OUTER MIRROR SWITCH INSPECTION


  1. INSPECT OUTER MIRROR SWITCH ASSEMBLY


    1. A015ZWDE13

      Inspect the outer mirror switch.


      1. Measure the resistance according to the value(s) in the table below when the switch is operated.

        Standard Resistance
        for LHD
        Tester Connection Switch Condition Specified Condition
        M19-16 (M+) - M19-14 (E)

        Adjust switch: Off

        Select switch: L or R

        		 10 kΩ or higher

        Adjust switch: Up

        Select switch: L or R

        		 90 to 110 Ω

        Adjust switch: Down

        Select switch: L or R

        		 437 to 503 Ω

        Adjust switch: Left

        Select switch: L or R

        		 744 to 856 Ω

        Adjust switch: Right

        Select switch: L or R

        		 225 to 275 Ω
        M19-13 (MSW) - M19-14 (E) Select switch: L 90 to 110 Ω
        Select switch: R Below 10 Ω
        Select switch: Neutral 10 kΩ or higher

        M19-21 (MR) - M19-14 (E)

        M19-18 (B) - M19-22 (MF)

        		 Retract switch not pressed Below 1 Ω

        M19-21 (MR) - M19-18 (B)

        M19-22 (MF) - M19-20 (E)

        		 Retract switch pressed Below 1 Ω
        for RHD
        Tester Connection Switch Condition Specified Condition
        L21-16 (M+) - L21-14 (E)

        Adjust switch: Off

        Select switch: L or R

        		 10 kΩ or higher

        Adjust switch: Up

        Select switch: L or R

        		 90 to 110 Ω

        Adjust switch: Down

        Select switch: L or R

        		 437 to 503 Ω

        Adjust switch: Left

        Select switch: L or R

        		 744 to 856 Ω

        Adjust switch: Right

        Select switch: L or R

        		 225 to 275 Ω
        L21-13 (MSW) - L21-14 (E) Select switch: L 90 to 110 Ω
        Select switch: R Below 10 Ω
        Select switch: Neutral 10 kΩ or higher

        L21-21 (MR) - L21-20 (E)

        L21-18 (B) - L21-22 (MF)

        		 Retract switch not pressed Below 1 Ω

        L21-21 (MR) - L21-18 (B)

        L21-22 (MF) - L21-20 (E)

        		 Retract switch pressed Below 1 Ω

        If the result is not as specified, replace the switch assembly.


        • *1: LHD

        • *2: RHD