FUEL LID OPENER MOTOR ASSEMBLY INSPECTION


  1. INSPECT FUEL LID OPENER MOTOR ASSEMBLY


    1. A01631SE01

      Apply battery voltage to the motor terminals and check that the motor operates and the shaft moves in the open direction.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 2

      Battery negative (-) → Terminal 1

      		 Motor operates and shaft moves in open direction

    2. Measure the shaft stroke.

      Standard
      10.3 mm (0.406 in.) or more

      If the result is not as specified, replace the motor assembly.