HOOD DISASSEMBLY


  1. REMOVE HOOD AUXILIARY HOOK CATCH


    1. A015ZDE

      Remove the 2 bolts and the hood auxiliary hook catch.

  2. REMOVE HOOD TO RADIATOR SUPPORT SEAL


    1. A01629U

      Using a clip remover, remove the 8 clips and the hood to radiator support seal.

  3. REMOVE HOOD INSULATOR


    1. A0160HZ

      Using a clip remover, remove the 12 clips and hood insulator.

  4. REMOVE WASHER NOZZLE SUB-ASSEMBLY


    1. A015YJUE01

      Using a screwdriver, disengage the 2 claws and separate the washer nozzle sub-assembly as shown in the illustration.

      Note

      Be careful not to damage the windshield.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A015ZWO

      Remove the washer nozzle sub-assembly from the washer hose.

      Note

      Washer nozzles cannot be reused.

  5. DISCONNECT WASHER HOSE ASSEMBLY


    1. A0162W8

      Disengage the 4 clamps and disconnect the washer hose assembly.