LUGGAGE COMPARTMENT DOOR OPENER SYSTEM DATA LIST / ACTIVE TEST


  1. READ DATA LIST

    Tech Tips

    Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note

    In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the tester on.

    4. Enter the following menus: Body / Body / Data List.

    5. Read the Data List according to the display on the tester.

      Body
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Trunk/BDoor Open SW Luggage door opener inner switch signal/ON or OFF

      ON: Luggage compartment door opener inner switch is pushed

      OFF: Luggage compartment door opener inner switch is not pushed

      		 -
      Trunk Main SW Luggage door opener main switch signal/ON or OFF

      ON: Luggage compartment door opener main switch is pushed

      OFF: Luggage compartment door opener main switch is not pushed

      		 -

  2. PERFORM ACTIVE TEST

    Tech Tips

    Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the tester on.

    4. Enter the following menus: Body / Body / Active Test.

    5. Perform the Active Test according to the display on the tester.

      Body
      Tester Display Test Part Control Range Diagnostic Note
      Trunk and Back-Door Open Operate luggage compartment door lock motor ON/OFF -