Note
When disconnecting the cable from the negative (-) battery terminal, initialize the following system after the cable is reconnected.
| System Name | See Procedure |
|---|---|
| Parking Assist Monitor System | |
| Power Window Control System |
PRECAUTION WHEN USING INTELLIGENT TESTER
When using the intelligent tester with the engine switch off to trouble shoot:
Connect the intelligent tester to the vehicle, and turn the courtesy light switch on and off at 1.5-second intervals until communication between the intelligent tester and the vehicle begins.
After all DTCs are cleared, check if the trouble occurs again 6 seconds after the engine switch is turned on (IG).