SLIDING ROOF HOUSING DISASSEMBLY


  1. REMOVE SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY


    1. A016041

      Disengage the claw and remove the sliding roof drive gear bracket.

    2. A01611B

      Remove the 2 bolts and sliding roof drive gear sub-assembly.

  2. REMOVE SUNSHADE TRIM SUB-ASSEMBLY


    1. A0163H8E01

      Remove the 2 screws and sliding roof piece sub-assembly LH and RH.

    2. Slide and remove the sunshade trim sub-assembly.

  3. REMOVE SLIDING ROOF DRIVE CABLE SUB-ASSEMBLY

    Tech Tips

    Do not disassemble the sliding roof drive cable sub-assembly except when replacing it.


    1. A015ZG7

      Remove the 2 screws and 2 sliding roof side stoppers.

    2. A0161U8E01

      Using a screwdriver, disengage the 2 claws. Then slide the sliding roof drip channel rearward to remove it.

      Tech Tips

      Tape the screwdriver tip before use.

    3. A015ZO5

      Hold down the window deflector.

    4. A0162VD

      Using a screwdriver, slide the sliding roof drive cable sub-assembly in the direction indicated by the arrow in the illustration to remove it.