HOOD REASSEMBLY


  1. CONNECT WASHER HOSE ASSEMBLY


    1. A0162W8

      Engage the 4 clamps and connect the washer hose assembly.

  2. ADJUST WASHER NOZZLE SUB-ASSEMBLY


    1. Select a washer nozzle so that the contact area is within the standard. Replace the washer nozzle with the selected one.

      A0161HEE02

  3. INSTALL WASHER NOZZLE SUB-ASSEMBLY


    1. A015ZWO

      Connect a new washer nozzle sub-assembly to the washer hose.

    2. A016297E01

      Engage the 2 claws and install the washer nozzle sub-assembly as shown in the illustration.

  4. INSTALL HOOD INSULATOR


    1. A0160HZ

      Install the hood insulator with the 12 clips.

  5. INSTALL HOOD TO RADIATOR SUPPORT SEAL


    1. A01629U

      Install the hood to radiator support seal with the 8 clips.

  6. INSTALL HOOD AUXILIARY HOOK CATCH


    1. A015ZDE

      Install the hood auxiliary hook catch with the 2 bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

  7. INSPECT WASHER NOZZLE SUB-ASSEMBLY


    1. With the engine running, check the position that the washer fluid hits the windshield.

      Standard
      Washer fluid hits the windshield in the areas shown in the illustration.

      Note

      If the result is not as specified, replace the washer nozzle.

      A0161G1E01
      Area Dimension
      A 29.8 mm (1.17 in.)
      B 74.1 mm (2.92 in.)
      C 169.1 mm (6.66 in.)
      D 196.7 mm (7.74 in.)