RELAY ON-VEHICLE INSPECTION


  1. INSPECT DEICER RELAY


    1. A0161CIE97

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Condition Condition Specified Condition
      3 - 5 when battery voltage is not applied between terminals. 10 kΩ or higher
      3 - 5 when battery voltage is applied to terminals 1 and 2. Below 1 Ω
      If the result is not as specified, replace the DEICER relay.

  2. INSPECT DEFOG RELAY

    A0160K3E01

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Condition Condition Specified Condition
      3 - 4 When battery voltage is not applied between terminals. Below 1 Ω
      3 - 5 When battery voltage is not applied between terminals. 10 kΩ or higher
      3 - 5 When battery voltage is applied to terminals 1 and 2. Below 1 Ω
      If the result is not as specified, replace the DEFOG relay.