WINDOW DEFOGGER SYSTEM REPAIR


  1. IF NECESSARY, REPAIR THE DEFOGGER WIRE

    A015YLIE10

    1. Clean the broken wire tips with a grease, wax and silicone remover.

    2. Place the masking tape along both sides of the wire.

    3. A015ZFH

      Thoroughly mix the repair agent (Dupont paste No. 4817 or equivalent).

    4. Using a fine tip brush, apply a small amount of the agent to the wire.

    5. After a few minutes, remove the masking tape.

      Note

      Do not repair the defogger wire again for at least 24 hours.