POWER WINDOW CONTROL SYSTEM DATA LIST / ACTIVE TEST


  1. READ DATA LIST

    Tech Tips

    Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / (desired system) / Data List.

    5. Read the Data List according to the display on the intelligent tester.

      Master Switch (Multiplex Network Master Switch Assembly)
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      D Door P/W Auto SW Driver side power window auto switch signal / ON or OFF

      ON: Driver side power window auto switch operated

      OFF: Driver side power window auto switch not operated

      		 -
      P Door P/W Auto SW Front passenger side power window auto up/down switch signal / ON or OFF

      ON: Front passenger door power window auto switch operated

      OFF: Front passenger door power window auto switch not operated

      		 -
      RR Door P/W Auto SW Rear RH side power window auto up / down switch signal / ON or OFF

      ON: Rear RH power window auto switch operated

      OFF: Rear RH power window auto switch not operated

      		 -
      RL Door P/W Auto SW Rear LH side power window auto up / down switch signal / ON or OFF

      ON: Rear LH power window auto switch operated

      OFF: Rear LH power window auto switch not operated

      		 -
      P Door P/W Up SW Front passenger side power window manual up switch signal / ON or OFF

      ON: Front passenger door power window manual up switch operated

      OFF: Front passenger door power window manual up switch not operated

      		 -
      RR Door P/W Up SW Rear RH side power window manual up switch signal / ON or OFF

      ON: Rear RH power window manual up switch operated

      OFF: Rear RH power window manual up switch not operated

      		 -
      RL Door P/W Up SW Rear LH side power window manual up switch signal / ON or OFF

      ON: Rear LH power window manual up switch operated

      OFF: Rear LH power window manual up switch not operated

      		 -
      P Door P/W Down SW Front passenger side power window manual down switch signal / ON or OFF

      ON: Front passenger door power window manual down switch operated

      OFF: Front passenger door power window manual down switch not operated

      		 -
      RR Door P/W Down SW Rear RH side power window manual down switch signal / ON or OFF

      ON: Rear RH power window manual down switch operated

      OFF: Rear RH power window manual down switch not operated

      		 -
      RL Door P/W Down SW Rear LH side power window manual down switch signal / ON or OFF

      ON: Rear LH power window manual down switch operated

      OFF: Rear LH power window manual down switch not operated

      		 -
      Window Lock Switch Status Window lock switch signal / ON or OFF

      ON: Window lock switch LOCK position

      OFF: Window lock switch UNLOCK position

      		 -
      Door Key Linked Lock SW Driver side door lock/unlock switch lock signal (key-linked lock switch)/ON or OFF

      ON: Driver side door key cylinder turned to lock position

      OFF: Driver side door key cylinder turned to unlock position

      		 -
      Door Key Linked Unlock SW Driver side door lock/unlock switch unlock signal (key-linked unlock switch)/ON or OFF

      ON: Driver side door key cylinder turned to unlock position

      OFF: Driver side door key cylinder turned to lock position

      		 -
      Door Key Linked P/W Up Door key linked power window up / ON or OFF Customization status displayed -
      Door key Linked P/W Down Door key linked power window down / ON or OFF Customization status displayed -
      P/W Up W/Transmitter Wireless transmitter linked power window up / ON or OFF Customization status displayed -
      P/W Down W/Transmitter Wireless transmitter linked power window down / ON or OFF Customization status displayed -
      P/W Up W/Smart Entry lock switch linked power window up/ON or OFF Customization status displayed -
      Number of Trouble Codes Number of trouble codes / Min.: 0 or Max.: 255 Number of DTCs displayed -
      Main Body (Main Body ECU RH (Cowl Side Junction Block RH))
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      D Door Courtesy SW Driver side door courtesy switch signal / ON or OFF

      ON: Driver side door open

      OFF: Driver side door closed

      		 -
      P Door Courtesy SW Front passenger side door courtesy switch signal / ON or OFF

      ON: Front passenger side door open

      OFF: Front Passenger side door closed

      		 -
      RR Door Courtesy SW Rear RH side door courtesy switch signal / ON or OFF

      ON: Rear RH side door open

      OFF: Rear RH side door closed

      		 -
      RL Door Courtesy SW Rear LH side door courtesy switch signal / ON or OFF

      ON: Rear LH side door open

      OFF: Rear LH side door closed

      		 -

  2. ACTIVE TEST

    Tech Tips

    Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / (desired system) / Active Test.

    5. Perform the Active Test according to the display on the intelligent tester.

      CAUTION:

      Be careful to avoid injuries as this test causes vehicle parts to move. During the Active Test, the jam protection function will not operate.

      Master Switch (Multiplex Network Master Switch Assembly)
      Tester Display Test Part Control Range Diagnostic Note
      Driver Side Power Window Power window UP / OFF (OFF) -
      Driver Side Power Window Power window DOWN / OFF (OFF) -