POWER WINDOW CONTROL SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    Tech Tips

    Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Master Switch or Body / Data List.

    5. Read the Data List according to the display on the intelligent tester.

      Master Switch (Multiplex Network Master Switch Assembly)
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Door P/W Auto SW Driver side door power window auto switch signal/ON or OFF

      ON: Driver side door power window auto switch is operated

      OFF: Driver side door power window auto switch is not operated

      		 -
      P Door P/W Auto SW Front passenger side door remote power window auto switch signal/ON or OFF

      ON: Front passenger side door remote power window auto switch is operated

      OFF: Front passenger side door remote power window auto switch is not operated

      		 -
      Rr Door P/W Auto SW Rear RH door remote power window auto switch signal/ON or OFF

      ON: Rear RH door remote power window auto switch is operated

      OFF: Rear RH door remote power window auto switch is not operated

      		 -
      Rl Door P/W Auto SW Rear LH door remote power window auto switch signal/ON or OFF

      ON: Rear LH door remote power window auto switch is operated

      OFF: Rear LH door remote power window auto switch is not operated

      		 -
      Door P/W Up SW Driver side door power window manual up switch signal/ON or OFF

      ON: Driver side door power window manual up switch is operated

      OFF: Driver side door power window manual up switch is not operated

      		 -
      P Door P/W Up SW Front passenger side door remote power window manual up switch signal/ON or OFF

      ON: Front passenger side door remote power window manual up switch is operated

      OFF: Front passenger side door remote power window manual up switch is not operated

      		 -
      Rr Door P/W Up SW Rear RH door remote power window manual up switch signal/ON or OFF

      ON: Rear RH door remote power window manual up switch is operated

      OFF: Rear RH door remote power window manual up switch is not operated

      		 -
      Rl Door P/W Up SW Rear LH door remote power window manual up switch signal/ON or OFF

      ON: Rear LH door remote power window manual up switch is operated

      OFF: Rear LH door remote power window manual up switch is not operated

      		 -
      Door P/W Down SW Driver side door power window manual down switch signal/ON or OFF

      ON: Driver side door power window manual down switch is operated

      OFF: Driver side door power window manual down switch is not operated

      		 -
      P Door P/W Down SW Front passenger side door remote power window manual down switch signal/ON or OFF

      ON: Front passenger side door remote power window manual down switch is operated

      OFF: Front passenger side door remote power window manual down switch is not operated

      		 -
      Rr Door P/W Down SW Rear RH door remote power window manual down switch signal/ON or OFF

      ON: Rear RH door remote power window manual down switch is operated

      OFF: Rear RH door remote power window manual down switch is not operated

      		 -
      Rl Door P/W Down SW Rear LH door remote power window manual down switch signal/ON or OFF

      ON: Rear LH door remote power window manual down switch is operated

      OFF: Rear LH door remote power window manual down switch is not operated

      		 -
      Power Window Lock SW Power window lock switch signal/ON or OFF

      ON: Power window lock switch is in LOCK position

      OFF: Power window lock switch is in UNLOCK position

      		 -
      Glass Position (Close-1/4) Door glass position (Fully closed - 1/4 open) signal/OK or CAUTION

      OK: Power window is going up by manual operation

      CAUTION: CAUTION may be displayed when resistance is applied within either position. In this case, there may be a foreign object stuck in that position

      		 -
      Glass Position (1/4-2/4) Door glass position (1/4 open - 2/4 open) signal/OK or CAUTION

      OK: Power window is going up by manual operation

      CAUTION: CAUTION may be displayed when resistance is applied within either position. In this case, there may be a foreign object stuck in that position

      		 -
      Glass Position (2/4-3/4) Door glass position (2/4 open - 3/4 open) signal/OK or CAUTION

      OK: Power window is going up by manual operation

      CAUTION: CAUTION may be displayed when resistance is applied in each position. In this case, there must be a foreign object stuck in that position

      		 -
      Glass Position (3/4-Open) Door glass position (3/4 open - Fully open) signal/OK or CAUTION

      OK: Power window is going up by manual operation

      CAUTION: CAUTION may be displayed when resistance is applied in each position. In this case, there must be a foreign object stuck in that position

      		 -
      Door key Linked P/W Up Door key linked power window up/ON or OFF Customization status displayed -
      Door key Linked P/W Down Door key linked power window down/ON or OFF Customization status displayed -
      P/W Up W/Transmitter Wireless transmitter linked power window up/ON or OFF Customization status displayed -
      P/W Down W/Transmitter Wireless transmitter linked power window down/ON or OFF Customization status displayed -
      P/W Up W/Smart Entry lock switch linked power window up/ON or OFF Customization status displayed -
      Body (Main Body ECU RH (Cowl Side Junction Block RH))
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      D Door Courtesy SW Driver side door courtesy light switch signal/ON or OFF

      ON: Driver side door open

      OFF: Driver side door closed

      		 -
      P Door Courtesy SW Front passenger side door courtesy light switch signal/ON or OFF

      ON: Front passenger side door open

      OFF: Front passenger side door closed

      		 -
      Rear Door Courtesy SW Rear door courtesy light switch LH and RH signal/ON or OFF

      ON: Rear door open

      OFF: Rear door closed

      		 -

  2. ACTIVE TEST

    Tech Tips

    Using the intelligent test to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Master Switch / Active Test.

    5. Perform the Active Test according to the display on the intelligent tester.

      Master Switch (Multiplex Network Master Switch Assembly)
      Tester Display Test Part Control Range Diagnostic Note
      Driver Side Power Window Driver side power window UP/DOWN -