INSTRUMENT PANEL SAFETY PAD DISASSEMBLY


  1. REMOVE NO. 1 HEATER TO REGISTER DUCT


    1. A015Z0R

      Remove the 3 screws <E> and the No. 1 heater to register duct.

  2. REMOVE NO. 3 HEATER TO REGISTER DUCT


    1. A0163DF

      Remove the 3 screws <E> and the No. 3 heater to register duct.

  3. REMOVE SIDE NO. 1 DEFROSTER NOZZLE DUCT


    1. A01600J

      Remove the screw <E> and the side No. 1 defroster nozzle duct.

  4. REMOVE SIDE NO. 2 DEFROSTER NOZZLE DUCT


    1. A0161J4

      Remove the screw <E> and the side No. 2 defroster nozzle duct.

  5. REMOVE DEFROSTER NOZZLE ASSEMBLY


    1. A01603U

      Remove the 3 screws <E> and the defroster nozzle assembly.

  6. REMOVE NO. 2 HEATER TO REGISTER DUCT


    1. A015ZCH

      Remove the 4 screws <E> and the No. 2 heater to register duct.

  7. REMOVE SIDE DEFROSTER NOZZLE


    1. A0160QZ

      Disengage the 4 claws to remove the side defroster nozzle.

  8. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY


    1. A0162XK

      Disengage the clamp and remove the No. 2 antenna cord sub-assembly.

  9. REMOVE NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System)


    1. A015ZLF

      Disengage the 2 clamps.

    2. Remove the 2 screws and navigation antenna.

  10. REMOVE NO. 2 INSTRUMENT PANEL WIRE (for LHD)


    1. A0162WU

      Disconnect the connector.

    2. Disengage the 4 clamps to remove the No. 2 instrument panel wire.

  11. REMOVE NO. 2 INSTRUMENT PANEL WIRE (for RHD)


    1. A0161AM

      Disconnect the connector.

    2. Disengage the 5 clamps to remove the No. 2 instrument panel wire.

  12. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY


    1. A0163A6

      Remove the 2 screws.

    2. A015YGME02

      Disengage the 5 hooks (A).

    3. Disengage the 5 hooks (B) and remove the front passenger airbag assembly from the instrument panel safety pad assembly as shown in the illustration.

  13. REMOVE DEFROSTER NOZZLE GARNISH


    1. A0162WP

      Disengage the 8 claws and 2 clips to remove the defroster nozzle garnish.

  14. REMOVE AUTOMATIC LIGHT CONTROL SENSOR


    1. A0162CU

      Disengage the 2 claws to remove the automatic light control sensor.

  15. REMOVE ENGINE SWITCH


    1. A0160H3

      Disengage the 2 claws to remove the engine switch.

  16. REMOVE INSTRUMENT PANEL SPACER


    1. A0162S3

      Remove the instrument panel spacer.

  17. REMOVE NO. 1 INSTRUMENT PANEL PIN


    1. A0160KP

      Remove the 4 screws <E> and the 4 No. 1 instrument panel pins.

  18. REMOVE NO. 1 METER HOOD RETAINER


    1. A016099

      Remove the 2 screws <E> and the No. 1 meter hood retainer.

  19. REMOVE NO. 2 METER HOOD RETAINER


    1. A01632Y

      Remove the 2 screws <E> and the No. 2 meter hood retainer.