FRONT SEAT OUTER BELT ASSEMBLY REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system Click here.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE LAP BELT OUTER ANCHOR COVER


    1. A0161TC

      Disengage the 2 claws and remove the lap belt outer anchor cover.

      Tech Tips

      Use the same procedure to remove the cover on the other side.

  3. SEPARATE FRONT SEAT OUTER BELT ASSEMBLY


    1. A015Z32

      Remove the bolt and separate the front seat outer belt assembly LH.

  4. REMOVE FRONT DOOR SCUFF PLATE


    1. A0160BJE01

      Put protective tape around the front door scuff plate.

    2. Using a moulding remover, disengage the 4 clips.

    3. A0161H2

      Disengage the 7 claws and remove the front door scuff plate LH.

  5. REMOVE REAR DOOR SCUFF PLATE


    1. A0161QSE01

      Put protective tape around the rear door scuff plate.

    2. Using a moulding remover, disengage the 2 clips.

    3. A015YIJ

      Disengage the 5 claws and remove the the rear door scuff plate LH.

  6. REMOVE LOWER CENTER PILLAR GARNISH


    1. A01636PE01

      Disengage the 3 claws and 5 clips, and remove the lower center pillar garnish LH.

  7. REMOVE CENTER PILLAR GARNISH


    1. A0161EC

      Remove the 2 screws.

    2. Disengage the 2 claws and remove the center pillar garnish LH by pulling it down.

  8. REMOVE FRONT SEAT OUTER BELT ASSEMBLY


    1. A0160BR

      Remove the nut and disconnect the shoulder anchor of the front seat outer belt assembly.

    2. A015Z65

      Using a screwdriver, pull out the locking button in the direction shown by the arrow to release the lock, and disconnect the pretensioner connector as shown in the illustration.

      Tech Tips

      Tape the screwdriver tip before use.

    3. Disconnect the connector.

    4. A0162AJ

      Remove the 2 bolts and the front seat outer belt assembly.