OCCUPANT DETECTION SENSOR REMOVAL


  1. REMOVE FRONT SEAT HEADREST ASSEMBLY

  2. REMOVE FRONT OUTER SEAT TRACK BRACKET COVER

    Tech Tips

    Use the same procedure for the LH side and RH side Click here.

  3. REMOVE FRONT INNER SEAT TRACK BRACKET COVER

    Tech Tips

    Use the same procedure for the LH side and RH side Click here.

  4. REMOVE REAR OUTER SEAT TRACK BRACKET COVER

    Tech Tips

    Use the same procedure for the LH side and RH side Click here.

  5. REMOVE REAR INNER SEAT TRACK BRACKET COVER

    Tech Tips

    Use the same procedure for the LH side and RH side Click here.

  6. REMOVE FRONT SEAT ASSEMBLY

    Tech Tips

    Use the same procedure for the LH side and RH side Click here.

  7. REMOVE FRONT SEAT INNER BELT ASSEMBLY

    Tech Tips

    Use the same procedure for the LH side and RH side Click here.

  8. REMOVE RECLINING POWER SEAT SWITCH KNOB

    Tech Tips

    Use the same procedure for the LH side and RH side Click here.

  9. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

    Tech Tips

    Use the same procedure for the LH side and RH side Click here.

  10. REMOVE FRONT SEAT CUSHION SHIELD ASSEMBLY

    Tech Tips

    Use the same procedure for the LH side and RH side Click here.

  11. REMOVE FRONT SEAT CUSHION INNER SHIELD

    Tech Tips

    Use the same procedure for the LH side and RH side Click here.

  12. REMOVE FRONT SEAT CUSHION COVER WITH PAD (for Front Passenger Side)


    1. for Driver Side:


      1. A01607R

        Disconnect the 2 connectors.

      2. Disengage the 3 clamps.

    2. for Passenger Side:


      1. A01615N

        Disengage the 2 clamps and separate the occupant detection sensor connector.

      2. A01634I

        Disconnect the 2 connectors.

      3. Disengage the 4 clamps.

    3. A0163E4

      Using a clip remover, remove the 2 clips.

    4. Disengage the hooks and remove the front seat cushion cover with pad.

  13. REMOVE OCCUPANT DETECTION SENSOR


    1. A0161CU

      Remove the 16 hog rings and the separate type front seat cushion cover from the occupant detection sensor.