CHILD RESTRAINT SEAT ANCHOR BRACKET INSTALLATION


  1. INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY


    1. A016151

      Install the child restraint seat anchor bracket sub-assembly with the 2 bolts.

      Torque:
      31 N*m  { 316 kgf*cm, 23 ft.*lbf }

  2. INSTALL REAR SEATBACK ASSEMBLY


    1. Place the seatback in the cabin.

      Note

      Be careful not to damage the vehicle body.

    2. A0163EJ

      Engage the 3 hooks.

    3. Install the rear seatback assembly with the 4 bolts.

      Torque:
      18 N*m  { 184 kgf*cm, 13 ft.*lbf }
    4. A015YIY

      Pass the seat belt through the rear seat shoulder belt guide RH.

    5. Engage the 2 claws and close the 2 caps of the rear seat shoulder belt guide RH.

    6. A0160LI

      Pass the seat belt through the rear seat shoulder belt guide LH.

    7. Engage the 2 claws and close the 2 caps of the rear seat shoulder belt guide LH.

  3. INSTALL REAR SEAT CUSHION ASSEMBLY


    1. A0162ZH

      Engage the 2 rear hooks of the seat cushion to the child restraint seat anchor bracket.

    2. Engage the 2 front hooks of the seat cushion to the vehicle body.

    3. Confirm that the seat cushion is firmly installed.

      Note

      When installing the seat cushion, make sure the seat belt buckle is not under the seat cushion.

  4. INSTALL REAR SEAT HEADREST ASSEMBLY LH

  5. INSTALL REAR SEAT HEADREST ASSEMBLY RH