SEAT BELT WARNING SYSTEM DATA LIST / ACTIVE TEST


  1. ACTIVE TEST

    Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in trouble shooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body Electrical / Combination Meter / Active Test.

    5. Read the Active Test according to the display on the intelligent tester.

      Combination Meter
      Tester Display Test Part Control Range Diagnostic Note
      Indicat. Lamp D-seat Belt D-SEAT BELT indicator light OFF/ON Confirm that the vehicle is stopped with the engine idling
      Indicat. Lamp P-seat Belt P-SEAT BELT indicator light OFF/ON Confirm that the vehicle is stopped with the engine idling