SEAT BELT WARNING SYSTEM TERMINALS OF ECU


  1. COMBINATION METER


    1. Disconnect the J34 and J35 combination meter connectors.

      A0162NWE02

    2. Measure the resistance according to the value(s) in the table below.

      If the result is not as specified, there may be a malfunction on the wire harness side.

    3. Reconnect the J34 and J35 combination meter connectors.

    4. Measure the voltage according to the value(s) in the table below.

      5. If the result is not as specified, there may be a malfunction on the wire harness side.

    5. CLOCK ASSEMBLY

      A015ZJJE08

      1. Measure the resistance according to the value(s) in the table below.

      6. If the result is not as specified, the clock assembly may have a malfunction.