SEAT BELT WARNING SYSTEM TERMINALS OF ECU


  1. COMBINATION METER


    1. Disconnect the J34 and J35 combination meter connectors.

      A01612JE04

    2. Measure the resistance according to the value(s) in the table below.

      If the result is not as specified, there may be a malfunction on the wire harness side.

    3. Reconnect the J34 and J35 combination meter connectors.

    4. Measure the voltage according to the value(s) in the table below.

      5. If the result is not as specified, there may be a malfunction on the wire harness side.

    5. CLOCK ASSEMBLY (w/ NAVIGATION SYSTEM)

      A015ZJJE08

      1. Measure the resistance according to the value(s) in the table below.

      6. If the result is not as specified, the clock assembly may have a malfunction.

    6. INTEGRATION CONTROL AND PANEL ASSEMBLY (w/o NAVIGATION SYSTEM)


      1. Disconnect the J54 integration control and panel assembly connector.

        A015ZUEE07

      2. Measure the resistance according to the value(s) in the table below.

      7. If the result is not as specified, there may be a malfunction on the wire harness side.

    7. Reconnect the J54 integration control and panel assembly connector.

    8. Measure the voltage according to the value(s) in the table below.

      9. If the result is not as specified, there may be a malfunction on the wire harness side.