FRONT PASSENGER SEAT BELT WARNING LIGHT INSPECTION


  1. INSPECT CLOCK ASSEMBLY (w/ Navigation System)


    1. A01638HE07

      Remove the clock assembly with the connector still connected Click here.

    2. Apply battery voltage from the wire harness back side between the terminals of the indicator, and check the lighting condition of the front passenger side seat belt warning light.

      Standard
      Measurement Condition Specified Condition

      Battery position (+) → Terminal J105-15 (IG+)

      Battery position (-) → Terminal J105-12 (PBEW)

      		 Front passenger side seat belt light comes on

  2. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY (w/o Navigation System)


    1. A016301E04

      Remove the integration control and panel assembly with the connector still connected Click here.

    2. Apply battery voltage from the wire harness back side between the terminals of the indicator, and check the lighting condition of the front passenger side seat belt warning light.

      Standard
      Measurement Condition Specified Condition

      Battery position(+) → Terminal J54-4 (IG+)

      Battery position(-) → Terminal J54-13 (PBEW)

      		 Front passenger side seat belt light comes on