REAR SEAT ASSEMBLY REASSEMBLY


  1. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER RH


    1. A015YTV

      Using hog ring pliers, install 7 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, avoid wrinkling the cover.

    2. Using hog ring pliers, install the bench type rear seat cushion cover RH to the separate type rear seat cushion pad sub-assembly with 25 new hog rings .

      A015YMU

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, avoid wrinkling the cover.

  2. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER LH


    1. A01635T

      Using hog ring pliers, install 7 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, avoid wrinkling the cover.

    2. Using hog ring pliers, install the bench type rear seat cushion cover LH to the separate type rear seat cushion pad sub-assembly with 26 new hog rings .

      A015YSN

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, avoid wrinkling the cover.

  3. INSTALL REAR SEAT UNDER TRAY SUB-ASSEMBLY


    1. A0162LK

      Engage the 2 hooks .

    2. Engage the 2 claws and install the rear seat under tray sub-assembly.

  4. INSTALL BENCH TYPE REAR SEATBACK COVER


    1. Using hog ring pliers, install 36 new hog rings.

      A0160AQ

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, avoid wrinkling the cover.

    2. Using hog ring pliers, install the bench type rear seatback cover to the bench type rear seatback pad with 44 new hog rings.

      A0160JD

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, avoid wrinkling the cover.

  5. INSTALL REAR SEAT SHOULDER BELT GUIDE RH


    1. A0160MZE01

      Install the rear seat shoulder belt guide RH with the screw (A) and the 2 screws (B).

  6. INSTALL REAR SEAT SHOULDER BELT GUIDE LH


    1. A0160INE01

      Install the rear seat shoulder belt guide LH with the screw (A) and the 2 screws (B).

  7. INSTALL REAR SEAT HEADREST SUPPORT


    1. Engage the 8 claws and install the 4 rear seat headrest supports.

      A0160W6

  8. INSTALL REAR SEAT CENTER ARMREST CUP HOLDER SUB-ASSEMBLY


    1. A016245E01

      Engage the 2 hooks.

    2. Attach the 6 fasteners and temporary install the rear seat center armrest cup holder sub-assembly as shown in the illustration.

    3. A015ZH4

      Install the rear seat center armrest cup holder sub-assembly with the 2 screws.

    4. Cover the rear seat center armrest cover to the rear seat center armrest pad.

    5. A015YN9

      Install the the 2 bushes.

    6. Install the 2 bolts.

  9. INSTALL REAR SEAT CENTER ARMREST ASSEMBLY


    1. A0161PC

      Install the rear seat center armrest assembly with the 2 nuts.