FRONT SEAT ASSEMBLY DISASSEMBLY


  1. REMOVE FRONT SEAT INNER BELT ASSEMBLY


    1. A0160LBE01

      for Driver Seat:


      1. Disconnect the connector and disengage the 3 clamps.

    2. for Passenger Seat:


      1. Disconnect the connector and disengage the 4 clamps.

    3. A0161U1

      Remove the nut and front seat inner belt assembly.

  2. REMOVE RECLINING POWER SEAT SWITCH KNOB


    1. A0160GGE01

      Using a screwdriver wrapped with protective tape, disengage the 2 claws and remove the reclining power seat switch knob.

  3. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB


    1. A0162PJE01

      Using a screwdriver wrapped with protective tape, disengage the 4 claws and remove the slide and vertical power seat switch knob.

  4. REMOVE FRONT SEAT CUSHION SHIELD ASSEMBLY


    1. A015ZYM

      Disengage the 2 hooks and remove the 2 rubber bands of the front seatback board from the front seat frame.

    2. A0161TM

      Remove the 6 screws.

    3. Disengage the claw and remove the front seat cushion shield assembly.

    4. Disconnect the connector from the front power seat lumbar switch.

  5. REMOVE NO. 1 FRONT SEAT CUSHION INNER SHIELD


    1. A0161TS

      Remove the 2 screws.

    2. Disengage the claw and remove the No. 1 front seat cushion inner shield from the front seat cushion shield.

  6. REMOVE LUMBAR SWITCH


    1. A0163JY

      Remove the 2 screws and the lumbar switch.

  7. REMOVE NO. 1 SEAT TRACK LOWER SPACER


    1. A0161UE

      Remove the 2 screws and the No. 1 seat track lower spacer.

  8. REMOVE FRONT SEAT CUSHION INNER SHIELD

    A015YX1

    1. Remove the screw.

    2. Disengage the claw.

    3. A015ZBB

      Separate the guide and remove the front seat cushion inner shield as shown in the illustration.

  9. REMOVE NO. 2 SEAT TRACK LOWER SPACER


    1. A01631F

      Remove the 2 screws and the No. 2 seat track lower spacer.

  10. REMOVE POWER SEAT SWITCH


    1. A0160FA

      Remove the 3 screws.

    2. Disconnect the 2 connectors and remove the power seat switch.

  11. REMOVE FRONT SEAT CUSHION COVER WITH PAD


    1. for Driver Side:


      1. A01607R

        Disconnect the 2 connectors.

      2. Disengage the 3 clamps.

    2. for Passenger Side:


      1. A01615N

        Disengage the 2 clamps and separate the occupant detection sensor connector.

      2. A01634I

        Disconnect the 2 connectors.

      3. Disengage the 4 clamps.

    3. A0163E4

      Using a clip remover, remove the 2 clips.

    4. Disengage the hooks and remove the front seat cushion cover with pad.

  12. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. A0161CU

      Remove the 16 hog rings and the separate type front seat cushion cover from the separate type front seat cushion pad.

  13. REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY


    1. A0161R4

      Open the lower part of the seatback board. Then remove the 2 screws.

    2. Disengage the 2 claws.

    3. Disengage the 2 hooks and remove the front seatback board sub-assembly.

  14. REMOVE FRONT SEAT HEADREST SUPPORT


    1. A015ZM1

      Disengage the 4 claws and remove the 2 headrest supports.

  15. REMOVE FRONT SEATBACK BOARD COVER SUB-ASSEMBLY


    1. A0160FR

      Remove the hog ring.

    2. Disengage the hooks and remove the front seatback board cover sub-assembly.

  16. REMOVE FRONT SEATBACK COVER WITH PAD


    1. A0160H9

      Remove the 10 hog rings.

    2. A0161DS

      Disengage the 2 hooks.

    3. Remove the 3 hog rings.

    4. A0161L0

      Remove the nut and the seatback cover bracket.

    5. Remove the front seatback cover with pad from the seatback frame.

  17. REMOVE SEPARATE TYPE FRONT SEATBACK COVER


    1. A016201

      Remove the 16 hog rings and the separate type front seatback cover from the separate type front seatback pad.

  18. REMOVE FRONT SEATBACK HEATER ASSEMBLY


    1. A015ZDD

      Cut off the 8 tack pins that fasten the seatback heater, and then remove the front seatback heater assembly from the separate type front seat cushion cover.

  19. REMOVE LOWER RECLINING ADJUSTER INSIDE COVER LH


    1. A015ZWS

      Disengage the clamp and disconnect the side airbag wire harness.

    2. Remove the 2 screws and disengage the guide to remove the lower reclining adjuster inside cover LH.

  20. REMOVE LOWER RECLINING ADJUSTER INSIDE COVER RH


    1. A015Z18

      Disengage the clamp and disconnect the side airbag wire harness.

    2. Remove the 2 screws and disengage the guide to remove the lower reclining adjuster inside cover RH.

  21. REMOVE UPPER RECLINING ADJUSTER INSIDE COVER LH


    1. A0160UK

      Remove the screw.

    2. Disengage the guide and remove the upper reclining adjuster inside cover LH.

  22. REMOVE UPPER RECLINING ADJUSTER INSIDE COVER RH


    1. A01629L

      Remove the screw.

    2. Disengage the guide and remove the upper reclining adjuster inside cover RH.

  23. REMOVE FRONT SEAT LOWER CUSHION SHIELD LH


    1. A015ZCF

      Remove the screw.

    2. Disengage the guide and remove the front seat lower cushion shield LH.

  24. REMOVE FRONT SEAT LOWER CUSHION SHIELD RH


    1. A016309

      Remove the screw.

    2. Disengage the guide and remove the front seat lower cushion shield RH.

  25. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY


    1. A0161BF

      Disconnect the connector.

    2. Remove the 2 screws and the lumbar support adjuster assembly.

  26. REMOVE SEAT POSITION SENSOR


    1. A0163F3E02

      Disconnect the connector.

      Note

      When disconnecting the airbag connector, take care not to damage the airbag wire harness.

    2. Using a "TORX" socket wrench (T30), remove the "TORX" screw and seat position sensor with the seat position sensor protector.

    3. A01609B

      Remove the seat position sensor from the seat position sensor protector as shown in the illustration.

  27. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY


    1. A01630Y

      Disconnect the 2 connectors.

    2. Disengage the 2 clamps and remove the seat heater control sub-assembly.

  28. REMOVE FRONT SEAT WIRE


    1. A0161YB

      Disconnect the 3 connectors.

    2. Disengage the 7 clamps and remove the front seat wire from the front seat frame assembly with adjuster.

  29. REMOVE FRONT SEAT SIDE AIRBAG ASSEMBLY

    CAUTION:

    When storing the front seat airbag assembly, keep the airbag deployment side facing upward.


    1. A015YTA

      Disengage the clamp.

    2. Remove the 2 nuts and the front seat side airbag assembly.

      CAUTION:


      • The nuts must not be reused.

      • Make sure that the front seat frame assembly with adjuster is not deformed. If it is, replace it with a new one.