PRE-CRASH SAFETY SYSTEM, Diagnostic DTC:B2060

DTC Code DTC Name
B2060 ABS Malfunction

DESCRIPTION

This DTC is output when a malfunction in the brake system is detected. This circuit consists of the skid control ECU and seat belt control ECU. Signals are sent from the skid control ECU using the CAN communication.

DTC No. DTC Detection Condition Trouble Area
B2060

  • Malfunction in brake system is detected

  • CAN communication system

  • Skid control ECU

  • Seat belt control ECU

INSPECTION PROCEDURE

Note

When the seat belt control ECU is replaced with a new one, Initialization must be performed Click here.

PROCEDURE


  1. CHECK DTC OUTPUT (CAN COMMUNICATION SYSTEM)


    1. Clear the DTCs Click here.

    2. Recheck for DTCs.

      OK
      DTC U0122 is not output.

    NG

    GO TO CAN COMMUNICATION SYSTEM Click here

    OK

  2. CHECK DTC OUTPUT (VEHICLE STABILITY CONTROL SYSTEM)


    1. Clear the DTCs Click here.

    2. Recheck for DTCs.

      OK
      DTC is not output.

    NG

    GO TO VEHICLE STABILITY CONTROL SYSTEM Click here

    OK

  3. CHECK DTC OUTPUT (PRE-CRASH SAFETY SYSTEM)


    1. Clear the DTCs Click here.

    2. Recheck for DTCs.

      OK
      DTC B2060 is not output.

    NG

    REPLACE SEAT BELT CONTROL ECU Click here

    OK

    CHECK FOR INTERMITTENT PROBLEMS (SYMPTOM SIMULATION) Click here