PRE-CRASH SAFETY SYSTEM, Diagnostic DTC:B2056

DTC Code DTC Name
B2056 Axial Gap of Radar Sensor

DESCRIPTION

DTC No. DTC Detection Condition Trouble Area
B2056

  • Radar sensor assembly malfunction is detected or initialization settings are faulty

  • CAN communication system

  • Millimeter wave radar sensor (axial adjustment)

  • Seat belt control ECU

INSPECTION PROCEDURE

Note

When the seat belt control ECU is replaced with a new one, Initialization must be performed Click here.

PROCEDURE


  1. CHECK DTC OUTPUT (CAN COMMUNICATION SYSTEM)


    1. Clear the DTCs Click here.

    2. Recheck for DTCs.

      OK
      DTC U1101 is not output.

    NG

    GO TO CAN COMMUNICATION SYSTEM Click here

    OK

  2. CHECK DTC OUTPUT (DYNAMIC RADAR CRUISE CONTROL SYSTEM)


    1. Clear the DTCs Click here.

    2. Turn the cruise control main switch on.

    3. Drive the vehicle at a speed of 45 km/h (27 mph) or more.

    4. Recheck for DTCs.

      OK
      DTC P1572 is not output.

    NG

    GO TO DYNAMIC RADAR CRUISE CONTROL SYSTEM Click here

    OK

  3. CHECK DTC OUTPUT (PRE-CRASH SAFETY SYSTEM)


    1. Clear the DTCs Click here.

    2. Recheck for DTCs.

      OK
      DTC B2056 is not output.

    NG

    REPLACE SEAT BELT CONTROL ECU Click here

    OK

    CHECK FOR INTERMITTENT PROBLEMS (SYMPTOM SIMULATION) Click here