AIRBAG CUT-OFF SWITCH INSPECTION


  1. INSPECT AIRBAG CUT OFF SWITCH


    1. A0162GQE04

      Turn the engine switch off.

    2. Disconnect the cable from the negative (-) battery terminal, and wait for at least 90 seconds.

    3. Disconnect the connector from the airbag cut off switch.

    4. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Manual Cut Off Switch Condition Specified Condition
      J91-2 (PMC+) - J91-1 (PMC-) Cut off switch is in ON position 360 to 440 Ω
      J91-2 (PMC+) - J91-1 (PMC-) Cut off switch is in OFF position 90 to 110 Ω