SEAT POSITION SENSOR REMOVAL

Note


  • Use the same procedure for the driver side of RHD and LHD vehicles.

  • The procedures listed below are for the driver side of an LHD vehicle.


  1. PRECAUTION

    CAUTION:

    Be sure to read Precaution thoroughly before servicing Click here.

  2. REMOVE FRONT SEAT ASSEMBLY LH


    1. Remove the front seat assembly LH Click here.

  3. REMOVE SEAT POSITION SENSOR


    1. A0163F3E02

      Disconnect the connector.

      Note

      When disconnecting the airbag connector, take care not to damage the airbag wire harness.

    2. Using a "TORX" socket wrench (T30), remove the "TORX" screw and seat position sensor with the seat position sensor protector.

    3. A01609B

      Remove the seat position sensor from the seat position sensor protector as shown in the illustration.