DESCRIPTION
The front passenger side - side collision sensor circuit (to determine deployment of the front seat side airbag assembly (passenger side) and curtain shield airbag assembly (passenger side)) is composed of the center airbag sensor assembly, side airbag sensor (passenger side) , and rear airbag sensor (passenger side).
The side airbag sensor (passenger side) and rear airbag sensor (passenger side) detect impacts to the vehicle and send signals to the center airbag sensor assembly to determine if the airbag should be deployed.
DTC B1625/22 is recorded when a malfunction is detected in the side airbag sensor (passenger side) circuit.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| B1625/22 |
|
|
WIRING DIAGRAM
INSPECTION PROCEDURE
PROCEDURE
CHECK SIDE AIRBAG SENSOR (PASSENGER SIDE)
Turn the engine switch off.
Disconnect the cable from the negative (-) battery terminal, and wait for at least 90 seconds.
Interchange the side airbag sensor (driver side) with the side airbag sensor (passenger side) and connect the connectors.
Connect the cable to the negative (-) battery terminal.
Turn the engine switch on (IG), and wait for at least 60 seconds.
Clear the DTCs stored in the memory Click here.
Turn the engine switch off.
Turn the engine switch on (IG), and wait for at least 60 seconds.
Check for DTCs Click here.
| Result | ||||||||
|---|---|---|---|---|---|---|---|---|
|
Tech Tips
Codes other than DTCs B1620/21 and B1625/22 may be output at this time, but they are not related to this check.
| B |
|
REPLACE CENTER AIRBAG SENSOR ASSEMBLY Click here |
| C |
|
REPLACE SIDE AIRBAG SENSOR (PASSENGER SIDE) Click here |
| A |
|
USE SIMULATION METHOD TO CHECK Click here