CLOCK INSTALLATION


  1. INSTALL CLOCK SUB-ASSEMBLY (w/o Navigation System)


    1. A0161JJ

      Connect the connector.

    2. A0162KSE01

      Install the cover with the 9 screws.

    3. A0160UB

      Engage the 5 claws.

    4. A0162OB

      Install the panel with the 6 screws.

  2. INSTALL RADIO RECEIVER ASSEMBLY (w/o Navigation System)


    1. A01627U

      Install the radio receiver assembly as shown in the illustration.

  3. INSTALL NO. 2 RADIO BRACKET (w/o Navigation System)


    1. A0162WI

      Engage the guide and install the No. 2 radio bracket with the 6 bolts.

  4. INSTALL NO. 1 RADIO BRACKET (w/o Navigation System)


    1. A0161RT

      Engage the guide and install the No. 1 radio bracket with the 6 bolts.

  5. INSTALL INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System)


    1. Connect each connector.

    2. Install the integration control panel with radio receiver assembly with the 4 bolts.

  6. INSTALL CLOCK ASSEMBLY (w/ Navigation System for DVD)


    1. A0161PJE02

      Check that the wire harness is in the position shown in the illustration.

    2. A0160GN

      Engage the 2 clips and install the clock assembly.

  7. INSTALL CLOCK ASSEMBLY (w/ Navigation System for HDD)


    1. A0161PJE02

      Check that the wire harness is in the position shown in the illustration.

    2. A0161QF

      Engage the 2 clips and install the clock assembly as shown in the illustration.

    3. A01600O

      Check that the wire harness is in the position shown in the illustration.

  8. INSTALL RADIO RECEIVER ASSEMBLY (w/ Navigation System)


    1. A0163IJ

      Install the radio receiver assembly as shown in the illustration.

  9. INSTALL NO. 2 RADIO BRACKET (w/ Navigation System)


    1. A0163ET

      Engage the guide and install the No. 2 radio bracket with the 7 bolts.

  10. INSTALL NO. 1 RADIO BRACKET (w/ Navigation System)


    1. A015YI2

      Engage the guide and install the No. 1 radio bracket with the 7 bolts.

    2. Engage the connector clamp.

  11. INSTALL DISPLAY AND NAVIGATION MODULE DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System)


    1. Connect each connector.

    2. Install the display and navigation module display with radio receiver assembly with the 4 bolts.

  12. INSTALL CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL


    1. A0160J3

      Engage the 4 claws to install the center lower instrument cluster finish panel.

  13. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. A015Z29

      for LHD:


      1. Connect the connector.

    2. A0160I2

      for RHD:


      1. Connect the connector.

      2. Engage the 3 clamps.

    3. A0162RW

      Engage the 11 claws to install the No. 3 instrument panel register assembly.

  14. INSTALL FRONT ASH RECEPTACLE BOX SUB-ASSEMBLY (w/ Ashtray)


    1. A0161X0E01

      Connect the connectors.

    2. Insert the protruding parts of the front ash receptacle box sub-assembly into the 2 guide holes as shown in the illustration.

    3. A0161L2

      Install the front ash receptacle box sub-assembly with the 2 screws <E>.

  15. INSTALL INSTRUMENT PANEL BOX ASSEMBLY (w/o Ashtray)


    1. A015YMFE02

      Connect the connectors.

    2. Insert the protruding parts of the instrument panel box assembly into 2 guide holes as shown in the illustration.

    3. A015YUI

      Install the instrument panel box assembly with the 2 screws <E>.

  16. INSTALL CONSOLE PANEL SUB-ASSEMBLY


    1. A0162AI

      Connect the connectors.

    2. Engage the 8 clips to install the console panel sub-assembly.

  17. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH


    1. A0163A0

      Engage the claw and 2 clips to install the upper No. 2 console panel garnish as shown in the illustration.

  18. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH


    1. A01626T

      Engage the claw and 2 clips to install the upper No. 1 console panel garnish as shown in the illustration.

  19. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A015ZOR

      Turn the shift lever knob clockwise and install the shift lever knob sub-assembly.

  20. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Navigation System for HDD)

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  21. ADJUST CLOCK