REGISTER LIGHT REMOVAL


  1. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY (for Center)


    1. A0163DOE02

      Using a screwdriver, disengage the 4 claws.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A015ZH6E03

      Apply protective tape to the areas shown in the illustration.

    3. A015ZAL

      Using a moulding remover, disengage the 4 claws starting from the right of the No. 3 instrument panel register assembly. Disengage the remaining 3 claws by pulling the No. 3 instrument panel register assembly by hand.

      Note

      Do not pry the lower part of the No. 3 instrument panel register assembly. Doing so may damage the assembly.

    4. Disconnect the connectors.

  2. REMOVE FRONT DOOR SCUFF PLATE


    1. A0160BJE01

      Put protective tape around the front door scuff plate.

    2. Using a moulding remover, disengage the 4 clips.

    3. A0161H2

      Disengage the 7 claws and remove the front door scuff plate LH.

  3. REMOVE FRONT DOOR OPENING TRIM COVER


    1. A016285

      Disengage the 4 claws and remove the front door opening trim cover LH.

  4. REMOVE SIDE INSTRUMENT PANEL


    1. A015ZPA

      Using a moulding remover, disengage the 5 claws and 3 clips, and then remove the side instrument panel LH.

  5. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY (for Driver Side)


    1. Pull the No. 1 instrument panel register assembly in the direction indicated by the arrow to disengage the 7 claws and 2 clips, and then disconnect the connector and remove it.

      A0163BZ

  6. REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY (for Front Passenger Side)


    1. Pull the No. 1 instrument panel register assembly in the direction indicated by the arrow to disengage the 7 claws and 2 clips, and then disconnect the connector and remove it.

      A0163BZ

  7. REMOVE INTERIOR ILLUMINATION LIGHT ASSEMBLY


    1. A015YSSE02

      Disengage the 4 claws.

    2. Disengage the clamp and remove the interior illumination light assembly.