SECURITY HORN ASSEMBLY (for Front Side) INSTALLATION


  1. INSTALL SECURITY HORN ASSEMBLY


    1. A015YZ2

      Connect the connector.

    2. Install the security horn assembly with the bolt.

  2. INSTALL BATTERY


    1. Install the battery.

    2. Install the battery insulator.

    3. Install the battery clamp with a nut.

      Torque:
      2.9 N*m  { 30 kgf*cm, 26 in.*lbf }

    4. Connect the cable to the positive (+) battery terminal.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    5. for LHD:


      1. A0162W7

        Connect the 2 clamps.

    6. for RHD:


      1. A0163BE

        Connect the 2 clamps.

    7. Connect the cable to the negative (-) battery terminal.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

      Note

      When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.