PERSONAL LIGHT INSPECTION


  1. INSPECT MAP LIGHT ASSEMBLY (PERSONAL LIGHT)


    1. A0161ONE12

      Connect a positive (+) lead from the battery to terminal 1 and a negative (-) lead to terminal 18.

    2. Check that the personal light comes on as shown in the table below.

      OK
      Condition Specified Condition
      Personal light switch LH ON Personal light LH comes ON
      Personal light switch LH OFF Personal light LH does not come ON
      Personal light switch RH ON Personal light RH comes ON
      Personal light switch RH OFF Personal light RH does not come ON

      If the result is not as specified, replace the bulb or map light assembly.