PERSONAL LIGHT REMOVAL


  1. REMOVE MAP LIGHT ASSEMBLY (w/o Sliding Roof)


    1. Using a screwdriver, disengage the 3 claws and open the cover.

      A015ZL8

      Tech Tips

      Tape the screwdriver tip before use.

    2. Remove the 2 screws.

    3. Using a moulding remover, disengage the 2 clips.

    4. Disengage the 2 guides.

    5. Disconnect the connector and remove the map light assembly.

  2. REMOVE MAP LIGHT ASSEMBLY (w/ Sliding Roof)


    1. Using a screwdriver, disengage the 3 claws and open the cover.

      A0161JL

      Tech Tips

      Tape the screwdriver tip before use.

    2. Remove the 2 screws.

    3. Using a moulding remover, disengage the 2 clips.

    4. Disengage the 2 guides.

    5. Disconnect the connector and remove the map light assembly.

  3. REMOVE MAP LIGHT BULB


    1. A01614Y

      Turn the 3 map light bulbs and 3 map light sockets in the direction indicated by the arrows in the illustration and remove them as a unit.

    2. Remove the 3 map light bulbs from the 3 map light sockets.