THEFT DETERRENT SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    Tech Tips

    Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note

    In the table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the tester on.

    4. Enter the following menus: Body Electrical / Body or Body No. 5 / Data List.

    5. Read the Data List according to the display on the tester.

      Body
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      IG SW Engine switch signal/ON or OFF

      ON: Engine switch on (IG) or start

      OFF: Engine switch off or on (ACC)

      		 -
      ACC SW Engine switch signal / ON or OFF

      ON: Turn the engine switch on (ACC)

      OFF: Turn the engine switch off

      		 -
      Luggage Courtesy SW Luggage compartment door courtesy switch/ON or OFF

      ON: Luggage compartment door is OPEN

      OFF: Luggage compartment door is CLOSED

      		 -
      D Door Courtesy SW D door courtesy switch/ON or OFF

      ON: Driver side door is OPEN

      OFF: Driver side door is CLOSED

      		 -
      P Door Courtesy SW P door courtesy switch/ON or OFF

      ON: Front passenger side door is OPEN

      OFF: Front passenger side door is CLOSED

      		 -
      Rear Door Courtesy SW Rear door courtesy switch/ON or OFF

      ON: Rear door is OPEN

      OFF: Rear door is CLOSED

      		 -
      Passenger Lock Position SW Passenger lock position switch/ON or OFF

      ON: Passenger door is LOCKED

      OFF: Passenger door is UNLOCKED

      		 -
      Rear Lock Position SW Rear lock position switch/ON or OFF

      ON: Rear door is LOCKED

      OFF: Rear door is UNLOCKED

      		 -
      Mech. Key Entry Alarm Cancel Cancel the alarm with an unlock operation using the mechanical key/ON or OFF Customized value displayed. -
      Intrusion Sen Detect Intrusion sensor setting / ON or OFF

      ON: Intrusion sensor is set

      OFF: Intrusion sensor is not set

      		 -
      Body No. 5
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Hood Courtesy Switch Engine hood courtesy switch signal/ON or OFF

      ON: Engine hood is OPEN

      OFF: Engine hood is CLOSED

      		 -

  2. ACTIVE TEST

    Tech Tips

    Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in trouble shooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the tester on.

    4. Enter the following menus: Body Electrical / Body or Body No. 5 / Active Test.

    5. Perform the Active test according to the display on the tester.

      Body
      Tester Display Test Part Control Range Diagnostic Note
      Security Indicator Security indicator ON/OFF -
      Hazard Hazard warning light ON/OFF -
      Intrusion Sensor Power Intrusion sensor power ON/OFF -
      Security Horn Theft warning siren ON/OFF -